The compressed air filter comes in two types: threaded connection filter and flange filter. The threaded connection filter is made of cast aluminum and uses Rp or NPT connections. The flange filter is made of carbon steel and uses DN connections.
Where should the compressed air filter be installed?
Put the air filter and water separator after the cooler or tank where it's cold. Before installing, take out any junk in the pipes. Put the filter in the main pipe and the end where it's being used. Don't use another pipe to go around it because it might leak.
Putting in and making use of tools that clean compressed air.
Choose where to put the filter and air-water separator. Before putting them in, make sure to release the pressure from the pipeline.
Put the compressed air filter and the air-water separator in the pipe up and down. Follow the arrows on the filter to know which way the air is going. Put a special tape or material to make sure the filter is properly closed. The highest pressure, the highest temperature, and the filter parts are written on the outside of the filter.
Can you simplify this text for me to understand better? To easily change the filter, remember to mark where threaded and flanged filters should be removed.
The following paragraph is not provided for me to rewrite in simple words. Please provide the original text for me to assist you better. You can connect two or more filters together using connectors instead of knots and wires.
Explain the passage in simpler terms. Some filters have a way to empty themselves automatically, but you can also do it by hand. Filters used for medical sterilization, removing dust, and vacuuming also need to be drained manually.
To start the system, open the inlet valve slowly to let air in and wait until the pressure stops changing. Make sure the filter and air-water separator don't have any holes before using it.
Keeping the compressed air filter working properly.
Taking care of things and checking them often will make sure they work the right way and last a long time. Remember, you can't replace any parts in the air-water separator.
Replacing filters in compressed air systems.
If you use coalescing filter cartridges only for liquid oil, they can be used forever. However, if they filter dirt and grains, the pressure will slowly increase. We can check how well a filter is working using a device called a differential pressure indicator. If the pressure difference is more than 400 mbar (6 psi) or the filter isn't letting enough air through, we need to change the filter. You need a new cartridge every year.
We use AC grade activated carbon filters to remove oil vapour and smells. We have to change them every six months or if they're not enough for the job. The filter gets dirty as we use it, so the pressure goes up. We also have to replace the dust filter cartridge regularly.
Lingyu Machinery - moisture removal coalescing compressed air filter