Buy carbon black content tester with Tech Trivial. This test is to determine the Carbon black content apparatus in polyethylene and polypropylene Insulation.

Carbon Black Content Apparatus is used for determining carbon black content in polyethylene and polypropylene materials. The difference in weight between before and after treatment in the apparatus is used to calculate it.

The following plastic test instruments contain carbon black:

• An electric furnace of at least 20 cm (8 in.) long enough to be used with the tubing.
• Stoppers: Two stoppers made of rubber or neoprene to fit the tube in 4.2, unless the tube has ground joints and mating connectors.
• Glass tubing, 10 mm in diameter, in sufficient quantities, and rubber or plastic tubing that matches for connections.
• Combustion Boat, about 8 by 1.9 by 1.3 centimeters (314 by 12 inches). Platine, quartz high-silica glass, or glazed porcelain work well.
• Flow Meter, 5 suitable for measuring gas flow at rates of 1 to 10 L/min. Iron-Constantan Thermocouple and a potentiometer or millivoltmeter suitable for determining temperatures in the range of 300 to 700 C.
• Traps: Three glass traps with inner and connecting tubes of 10 millimeters in diameter and removable ground-glass-connected heads.

Contact Us for further information.