Application of Concrete Pump in Construction Pouring

  • click to rate

    Many users in the construction of high floors are using secondary structural pump, secondary structural column pump and other equipment to help the construction, because this can not only better help the construction, but also to a certain extent to save the construction cost of the project.  Only in the construction, Xiaobian tells customers that they need to do some relevant auxiliary work in order to be good at construction.

    When the secondary structure pump is constructed in the high-rise, the construction of large volume reinforced concrete cap will use deep water pile foundation. At this time, it is necessary to do a good job in temperature control and crack prevention measures, in order to avoid some faults affecting the construction quality.  Secondly, in the concrete aggregate to add qualified fly ash or appropriate admixture, in order to ensure the use of secondary structure pump construction can ensure the construction quality of the cap.  

    The construction sequence of concrete cloth. Luton suggests that it should be placed in a stable position in the middle of the site when using equipment for construction.  Then in accordance with the order of casting while removing pipes, from west to east, from the middle to both sides of the pouring order to construct.

    The secondary structure of the pump during the construction of concrete bleeding phenomenon of treatment measures, mentioned above to use layered casting to control the order of cloth.  However, because the interval time between the upper and lower layers of concrete is relatively long, when the slump is too large, it will produce the secreting layer, so the secondary structure pump pouring construction should be set up in no pouring puddles. Clink this link: https://lutonmachinery.com/concrete-pump-price/ for more concrete pump.