Best Regulation 126 in Footscray Melbourne In Victoria, a Certificate of Compliance is a document that is regulated by the Victorian Building Authority and is referred to as "Regulation 126: Certificate of Compliance—Design". The Victorian Building Authority administers Victoria’s building legislation system. The document is a statement made by the engineer (us) to the Building Surveyor that all structural design works have been carried out in accordance with the Building Act 1993, the Building Regulations 2018, the National Construction Code, and the relevant Australian Standards.
When the Building Surveyor approves the Building Permit application, one complete set of certified documentation is forwarded to each applicant (person applying for the building permit) and the local Council. The third set is retained by the Building Surveyor. The purpose of Regulation 126 is to ensure that adequate protection against foreseeable hazards is introduced as early as possible through this certification procedure. It also aids in determining whether a proposed project is in accordance with FEDERAL, STATE, or LOCAL HISTORICAL LAND USE REGULATIONS. Architecture and Engineering (ArchiENG) provides professional peer review and certification services for engineering reports produced by others. Provided that the report satisfies the minimum requirements to demonstrate that Performance Requirements have been satisfied, a Regulation 126 design certificate will be issued.
If a building permit is granted, it will be in accordance with the construction requirements set out in the Building Code of Australia (BCA). If a Certificate of Compliance has been issued, then this document must be provided to the Building Surveyor when applying for a building permit.
Together with the Certificate of Compliance, three sets of all design and drawing documentation must be provided to the Building Surveyor. Each and every document must be certified with a structural adequacy approval and signed and dated by a Registered Building Practitioner of the category and class civil Engineer’ (us). These documents may be issued in hardcopy or digital format. Once the Building Surveyor approves the Building Permit application, one complete set of certified documentation is forwarded to each applicant (person applying for the building permit) and the local Council. The third set is retained by the Building Surveyor. ArchiENG offers peer review and certification services for engineering reports produced by others. Provided that the report satisfies the minimum requirements to demonstrate that Performance Requirements have been satisfied, a Regulation 126 design certificate will be issued.
Conclusion
Some key takeaways are that compliance with Regulation 126 is a condition of obtaining a permit from the local council. This regulation applies to all building structures where a registered structural engineer must certify each and every design and calculation document under their seal after substantive peer review (by ArchiENG or another approved firm). The building permit will only be issued after all design documentation has been satisfied.