Dual-line Lubrication Systems

• Posted by ciso ciso July 3, 2025 Filed in Business 27 views
  click to rate

  CISO autmotic dual-line systems can be used on large systems with dispersed lubrication points that require varying lubrication quantities. These central dual line lubrication systems utilize two main lines that are supplied alternately with lubricant from a high-pressure pump via a change-over valve at up to 400 bar (5 800 psi) Branch lines, along the main lines, are connected with dual-line metering devices to supply a large volume of lubricant to the lubrication points Within large dual-line systems, end-of-line pressure switches are used to control and monitor the centralized dual line lubrication systems.

   

  Attention of Autmotic Dual Line Lubrication System Products

  Do not install or remove the metering devices when the system is under pressure or the pump in operation.

   

  Always protect the centralized dual line lubrication systems connected to the pump with a pressure reducing valve.

   

  lncorrect operation may lead to damage resulting from insufficient or excessive lubrication of bearings or lubrication points.

   

  Your own alterations or modifications of installed automatic dual line lubrication systems should only be carried out if approved with the manufacturer or his appointed dealer. Contact Cisolube centralized grease lubrication system for detailed information.

   

  lnstallation of Autmotic Dual Line Lubrication System Products

  For all work at the metering device, observe extreme cleanliness.

   

  Attach the metering devices to even surfaces without tension. When base plates are used, first weld the base plates without the metering devices and then attach the metering devices onto them.

   

  Protect the metering devices from dust and influences of heat (observe the maximum admissible operating temperatures).

   

  The metering devices must be easily accessible for . check and installation work.

   

  Before connecting the feed lines to the metering devices, fill them with lubricant.

   

  when connecting the main lines take care to always connect the same line (l or ll) to the same metering device inlet.

   

  This makes it easier to check of the metering device because all indicator pins are either in or out after each cycle.

   

  CISO Autmotic Dual Line Lubrication System Components

  Lubricating pumps

   

  A、ZP01/02 Lubrication Pump

  B、ZP08/14/24 Lubrication Pump

   

  Grease distributor

  DSG Dual-line Metering Devices

  DSL Dual-line Metering Devices

  DSKH Metering Devices

   

  Accessories

  WP-C Electric Change-Over Valve

  DU-C Hydraulic Change-Over Valves

  MC-ⅠSystem Control Box

  EPW End-of-line Pressure Switches

   

  For more information about centralized grease system, please feel free to contact us!