How to use an industrial endoscope camera?
-
Using an industrial endoscope camera (sometimes called an industrial borescope) is pretty straightforward, but getting clear images and avoiding equipment damage requires following the right steps.
Here' s a step-by-step guide:
1. Prepare the Equipment
Check battery or power supply – Fully charge the device if it’s portable.
Inspect the camera head – Make sure the lens is clean and the LED lights are functional.
Select the right probe length & diameter – Choose based on the inspection area (e.g., 5 m flexible probe for pipes, short rigid probe for engine inspection).
2. Safety First
Turn off machinery before inserting the camera.
Wear protective gear (gloves, safety glasses) if inspecting hazardous areas.
Ensure the probe is compatible with the environment (e.g., waterproof for pipes, oil-resistant for engines).
3. Connect and Set Up
Attach the probe to the display unit if it’s detachable.
Turn on the device and adjust LED brightness—too much light can cause glare, too little can make images unclear.
Set the camera resolution to the highest setting for detailed inspection.
4. Inserting the Probe
Insert slowly to avoid bending or damaging the camera.
Guide the probe carefully through curves—most industrial endoscopes have articulation controls (joystick or wheel) to angle the camera head.
Watch the live feed on the screen to navigate.
5. Inspect and Record
Use zoom or rotation functions if available to get better viewing angles.
Take photos or videos for documentation—important for maintenance reports.
Move the camera slowly to avoid motion blur.
6. After Inspection
Gently remove the probe—don’t yank it out.
Clean the lens and cable with a soft cloth and appropriate cleaning solution.
Store in a dry, dust-free case to protect electronics.
Pro Tips for Better Results
For dark or reflective surfaces, adjust LED intensity to avoid glare.
In oily or wet environments, wipe the lens periodically during inspection.
If the image is blurry, check if the lens needs cleaning rather than adjusting focus excessively.
Example Uses in Industry
Checking engine cylinders in automotive and aviation maintenance
Inspecting weld seams inside tanks or pipelines
Looking for corrosion or blockages in HVAC ducts
Quality control in manufacturing and assembly lines
If you need an industrial endoscope, please contact us.