Recent Entries

• How to Install a door handle?

  by Degol Fung March 16, 2022
  Tools/Materials:Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.2. Use a pencil to wrap arou...

• How to Install a door handle?

  by Degol Fung March 15, 2022
  Tools/Materials:Pencils, screwdrivers, hammers, rulers, electric drills, door locks, dust plates, screws, 1" (2.5cm) chisels, hole saw bits1. Position and hold the latch on the hole of the door. When you line up, you should be able to see the hole through the latch plate.2. Use a pencil to wrap arou...

• WHAT KIND OF FLOOR DRAIN MATERIAL TO CHOOSE?

  by Degol Fung March 9, 2022
  1. PVC floor drainThe price of PVC floor drains is relatively low, and the effect is also good. But it also has the disadvantage that the material is brittle and easy to age. This kind of floor drain was used by my family in the past, it is really not durable, and it will be replaced in a short time...

• How are the hinges adiusted?

  by Degol Fung February 18, 2022
  1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure an...

• http://mail.party.biz/blogs/47997/60086/prohibited-staying-inve

  by Degol Fung February 17, 2022
  1. If you need to adjust the slow-down speed, then you can adjust it through the nut holes at the upper and lower ends of the hinge hinge. Generally, use the hexagon socket head screw to rotate, turn left or right, respectively, corresponding to the adjustment of the hinge. The hydraulic pressure an...