Recent Entries

• WIT MOLD New CNC Machine Has Started Working

  by Doris Lee March 23, 2022
  This new machine is focusing on building your optic surface. If you worry about whether it is okay to make the radius 0.1mm for your optics surface or your light guide,  WIT MOLD can help you to complete this job successfully. New CNC machine

• What Does Mold Saving In The Mold Mean?

  by Doris Lee March 23, 2022
  Mold saving refers to the fitting that does not reach the design accuracy when assembling the mold, and abnormalities will occur when the product is produced, and the required accuracy is not reached, and the mold saving process is required for fine adjustment. The method of mold saving genera...

• Advantages And Disadvantages Of Two-Shot Injection Molding

  by Doris Lee February 27, 2022
  There are a variety of manufacturing methods used to create products using plastic polymers, including Two Shot Mold, compression thermoset molding, and extrusion. Although all of these are viable manufacturing processes, this process has several advantages that make it the first choice of many...

• The Difference Between Double Shot Molding And Overmolding

  by Doris Lee February 27, 2022
  There are a variety of manufacturing methods used to make plastic molded products. The two methods mentioned in this article, double shot molding, and over-molding, are viable manufacturing processes and provide some advantages for many plastic manufacturers. Both of these processes are difficult to...

• Benefits of Structural Foam Molding

  by Doris Lee January 25, 2022
  Structural foam molding is a process in which an inert gas is added to a molten polymer, which is then injected into a standard injection mold. During this process, the blowing agent activates and pushes the resin uniformly into the cavity. As the part cools, solid skin is formed over the mold....