During the PET bottle compression test, put the PET bottle in the machine two-horizontal pressure plate, start the PET bottle of Suzhou European instruments, and the two pressure discs will be pressed.PET bottle embryos are Plastic Trigger Sprayer Head Suppliers typical injection molding products, which is convenient for transportation, mostly plastic materials, uniform texture, good insulation, and is a plastic bottle, an intermediate product of a plastic bottle and oil barrel.
It has strong picking from mold processing to machine equipment, easy to get started, and it is difficult to do. The PET flank is processed again to form a plastic bottle again, including cosmetics, medicine, health, drinks, miners, reagents, etc. Polyethylene terephthalate is the primary variety in thermoplastic polyesters. A referred to as PET or PETP (hereinafter or called PET), commonly known as polyester resin.
It is a polycondensate of terephthalic acid with ethylene glycol, which is collectively referred to as a thermoplastic polyester together with PBT, or a saturated polyester. Wheat resistance, fatigue, friction and size stability, small wear, high hardness, high toughness in thermoplastic; electrically insulating performance is good, affected by temperature, but high resistance. PET bottles are often used in packaging, and the packaging is often stacked during transportation or inventory.
The PET bottle routine detection has a thickness detection of bottle wall, compressive detection, and cap opening of fatigue detection. If there is any problem, please contact us! . PET is a milky white or a front yellow highly crystalline polymer, and the surface is smooth and lustrous. " Non-toxic, weather resistance, good chemical, low water absorption, low acid and organic solvent.