What are the common failures of Maize Flour Milling Plant?

• Posted by Xuemei Ma May 26, 2022 Filed in Business #Maize Flour Milling Plant  152 views
  click to rate

  During the use of Flour Milling Plant, there are many factors that will affect the equipment, such as dust, temperature, humidity, vibration, noise, corrosion, etc. The personnel should pay attention to strict control to ensure that the working table of the flour mill is fixed and flat, and meets the requirements for use. After the milling machine is used, it should be cleaned and restored in time. In addition, the power supply equipment should be installed with an independent power switch according to the rated power, and have a good grounding wire and a regulated power supply.

  Proper use and proper maintenance are the two main aspects that affect the life of flour mill equipment and the best way to reduce the cost of repairing or replacing new flour mill equipment. Get the maximum profit at the lowest cost, as a Flour Milling Plant supplier, share some common knowledge with you.

  

  What problems do flour mill equipment need to know?

  Freshly processed flour is wet

  Some people may mistakenly believe that there is a mechanical problem. but it is not the truth. I have told you that in the process of flour processing, cleaning is an essential process, mainly to remove impurities and facilitate the peeling of wheat.

  Malfunctioning screw agitator

  This may be caused by excessive feeding, incorrect motor rotation, blockage of the discharge port, broken agitator blades, etc. The relevant technical personnel need to check carefully, find out the reasons, and then solve them.

  Motor failure

  Typically, flour mill equipment uses more than 10 different sizes of motors. Therefore, once a problem occurs, it must be checked in time to avoid potential safety hazards. The cause may be lack of oil in the bearing, damage to the motor, or overloading.

  Airlock failure

  The bag may be sucked up due to poor ventilation. Common reasons are leakage at the joint, wear of the impeller, etc. In the latter case, a rubber plate can be added to the outer edge to improve the situation.

  Maintenance of milling machinery

  The maintenance of flour mill equipment is of great help to the service life of the flour mill and a single mill. Therefore, in the daily processing and production, it is necessary to carry out regular maintenance on the flour mill equipment.

  For routine maintenance, personnel should pay attention to some special parts of flour mill equipment. Such as glassware should be kept clean, dry and classified storage. At the same time, direct heating of glass instruments should be avoided. The correct method is to use asbestos mesh to heat slowly and evenly.

  In order to avoid some erroneous operations of personnel, causing equipment failure, affecting efficiency and shortening the service life, as a regular manufacturer, its flour mill equipment operators are required to be proficient in corresponding laws, regulations and management systems, and obtain professional qualification certificates or certificates. It can be operated after qualified training, which can greatly reduce the failure rate.

  Our company Pingle Group has Maize Flour Milling Plant for sale, welcome to consult!