BOPP Film VS BOPET Film VS BOPA Film
-
BOPP Film, BOPET Film, and BOPA Film are very common materials for flexible packing film. But they have different properties and used for different applications.
1. BOPP film
BOPP films
BOPP films (Biaxially Oriented PolyPropylene Films) are produced by stretching polypropylene film in both machine direction and transverse direction. BOPP film is used in vast range of applications comprising packaging, labeling and lamination. BOPP Films are preferred substrate for food packaging globally because of its inherent moisture barrier properties, seal ability, high clarity and graphic reproduction and shelf appeal, best possibilities of the pack being a mono layer/homogeneous structure.
2. BOPET Film
PET Siliconized Release Liner
PET Film is a polyester film made from orientated polyethylene terephthalate (PET). BOPET is used because of its high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties and electrical insulation
3. BOPA Film
Biaxially oriented nylon film (BOPA), has excellent characteristics, can be used for a variety of high-grade packaging. BOPA has a very high tensile strength, anti-puncture strength, excellent flexibility, resistance.
4. BOPP Film • BOPET Film • BOPA Film property different in table
BOPP BOPET BOPA General Physical stability, mechanical strength, air tightness, high transparency and gloss, tough wear resistance, but heat sealability and printing performance differences Excellent mechanical properties, high rigidity, hardness and toughness, puncture resistance, friction resistance, high-temperature resistance and low-temperature resistance, chemical resistance, oil resistance, air tightness and fragrance retention, non-toxic, tasteless, easy to recycle Has good abrasion resistance and corrosion resistance, high-temperature resistance, puncture resistance and tear resistance, good oxygen barrier property, but the poor barrier to water vapor, large moisture absorption and moisture permeability, and poor heat sealability Air barrier Poor Good Good Liquid barrier Good Ok Poor Metalizing Poor Good Ok Tensile strength Poor Good Good Temperature range -50-120℃ -70-150℃ -60-150℃5. Printability
In the three flexible packing film, BOPA’s printing performance is the best. Because BOPA film has a polar structure. No surface treatment is required before printing.
The BOPP printing performance is the worst. Because BOPP film is a non-polar polymer. Their chemical stability is high. The surface tension is small. It is not easy to be infiltrated by most inks and solvents.
The printing performance is mainly determined by the surface tension:
Surface tension Value (mN/m) PP 34 (mN/m) PET 40~43 PA 46~52Contact us
We are a BOPET/BOPP flexible packing film manufacturer from China. If you have any questions or inquiries about packaging film, welcome contact us online or Email us.