Recent Entries

• Ceramic Caster Tip Feeds the Aluminum Melt

  by Christina Wang March 14, 2022
  The ceramic caster tip, as the "throat component" that feeds the aluminum melt into the high-throughput continuous casting and rolling mill, plays a very important role. Once problems such as clogging of the casting nozzle occur, the machine can only be shut down for replacement, resulting in produc...

• Double-rotor Degassing System for Hydrogen and Impurity Removal

  by Christina Wang March 14, 2022
  The double-rotor degassing system is used as a hanging type rotating degassing and impurity removal device. The degassing medium is recommended to use nitrogen or argon with a purity of 99.996% or more (in consideration of the high cost of argon, nitrogen is recommended). The double-rotor degassing...

• High Temperature Refractory Cone Made by Vacuum Forming

  by Christina Wang March 14, 2022
  AdTech high-temperature refractory cone is made of high-aluminum fiber and made by vacuum forming process, with a yield rate of up to 99%. Refractory cone is also called Ceramic Cone, Tap Out Cone, Alumina Silicate Tap Cone. AdTech high-temperature plugs have uniform mass distributi...

• Foundry Ceramic Filters Selection

  by Christina Wang March 14, 2022
  The correct selection of foundry ceramic filters can improve the cleanliness of aluminum melt. The selection of foundry ceramic foam filters is first determined according to the impurity content in the aluminum melt, the melt transfer flow rate and the quality requirements of the final cast pr...

• Caster Tips and Nozzle

  by Christina Wang March 14, 2022
  The caster tips and nozzle can continuously cast aluminum plates several meters wide and about one centimeter thick at a speed greater than one meter per minute for several days. The molten metal casting tip nozzle for the continuous casting machine is a pair of substantially rectangular ...