The correct way of hanging the color steel plate

• Posted by 123 asd August 3, 2023 Filed in Business #  #Color steel plate  48 views
  click to rate

  In the construction of steel structure space frame engineering, the most commonly used maintenance system is color steel plates. If the color steel plate operation is improper during the hanging process, it is easy to cause bending and deformation, causing unnecessary losses. Below the steel structure space frame manufacturer takes us to understand the correct hanging method of color steel plates:

  There are many ways to hang color steel plates, such as car hanging, tower crane rising, rolling machine lifting, and manual improvement.

  The improvement methods of tower cranes and car cranes are used to multipoint lift. This hanging method can lift multiple plates at a time. However, in large -scale engineering, the lifted plates are not easy to send to the installation point, increasing the long -distance manual handling of the roof. It is difficult to walk on the roof and easily destroy the installed color steel plates. It is not possible to use the specialty of large -scale cranes to improve the capacity of large tonnage. The use rate is low and the mechanical cost is high. But it is convenient to lift, and the lifted plates are not easy to damage.

  The method of rolling machine improvement, this method does not use large machinery. The equipment can be flexibly moved to the place where it needs to be installed, so it is convenient and low. This method increases small each time, but the roof is short, which is a often used method.

  Another method is to adopt the manual improvement method of steel wire sliding method. This method is to set a number of steel wires on the hiking of the building and set the tube on the wire. The color steel plate is placed on the steel pipe, and the workers on the roof are pulled along the steel wire along the steel wire, and the color steel plate is raised to the roof, and then manually moved to the installation location. This improvement method is suitable for color steel plate materials with relatively long size. Because the operation is relatively slow, it is recommended to use it when the number is relatively small.