Replacing the pad on an arbitrary orbital sander is simply one among the foremost usual upkeep procedures discovered within the power device sector. Luckily for woodworkers and also tool individuals ridgid orbital sander it's likewise among the foremost available jobs your power tools will every as you to hold out. Changing your sander's backer pad involves a touch above, well, removing one, mounting the opposite, and also slapping a few screws around in between.

To cut straight to the chase, the first step in any fixing or upkeep treatment is to disengage also as unplug your sander. All power devices, also as functioning machines, must be entirely off before you start handling them.

Also, since not all sanding pads are an equivalent (the consistency of the pads and also a spread of their dust-collection also as screw holes vary from pad to pad), the first step in changing this thing on your sander is ensuring you've got the proper backer pad (from the simplest manufacturer) for the procedure at hand. to try to do this, all you need is that the model number of your tool and also one among the lists below a few of things: access to the tool's schematic also as parts listing, accessibility to a tools/parts/service associate at your preferred tool parts dealer, or convenience to the online. Anyone of those methods will set you on the simplest path to finding the precise component number for the precise pad you need. Just share your device's version number, and also the item you would like for it must imitate.

Once you've got obtained the right pad for your particular sander, you'll get into the meat of the procedure. First, remove all installing screws from the prevailing backer pad (there got to be either three or four screw-holes, the varied other openings (either five or 8) will undoubtedly be for dust collection). Eliminate also as eliminate the old pad. the world the new backer pad on the sander matching the screw-holes within the pillow to those on the sander. Place also as a touch tighten-down each screw. Again, leave each screw somewhat loosened till all screws are inserted and half-tightened. Once all installing screws are in situ, tighten them securely.

TIP: Some individuals discover it less complex to put the installing screws into the screw-holes on the new pad before matching them to the holes on the sander. this enables the screws to steer themselves right into location. Using this method, it's still essential to half-tighten each screw before fully tightening up any of them.

And at that, you've got effectively replaced the backer pad on your arbitrary orbital sander. Involve the facility tool, giver the sander a quick spin to make sure the pad sits tight, and also consider the thing now in beautiful fighting kind.