Recent Entries

• Ultrafine Vertical Mill Maintain Regularly

  by gjsohcat Soly August 23, 2022
  The partition board or grate seam is blocked by some sundries or debris. In severe cases, it is completely blocked, and the grate hole becomes smaller, which causes the ultrafine vertical mill to be "full grinding". If the ultrafine vertical mill is not maintained regularly or is in disrepair for a ...

• Lining Plate Of The Vertical Roller Mill

  by gjsohcat Soly August 22, 2022
  The water content of the grinding material is too high (usually 2.0%), and the ventilation in the cylinder is poor, so that the water vapor and fine materials generated during the grinding process cannot be taken out of the vertical roller mill in time. It is too large and adheres to the ...

• Check The Main Bearing Hydraulic Station

  by gjsohcat Soly August 21, 2022
  To check the oil quantity and cleanliness, the oil quantity and cleanliness can be checked through the oil flow indicator, the observation hole on the hollow journal bush cover, the oil level indicator in the fuel tank, etc. In addition, if the parking time is long in winter, the three-way cock at ...

• The Vertical Roller Mill Lining

  by gjsohcat Soly August 18, 2022
  Check whether the bolts between the connections are loose or abnormal, whether the mineral water supply is uniform, whether the gaskets and linings are seriously worn, and generally the wear degree of the vertical roller mill lining does not exceed 70%;  Check whether the air compressor pres...

• The Process Of Ultrafine Vertical Mill

  by gjsohcat Soly August 17, 2022
  Ultrafine vertical mill debugging In the process of debugging, the motor should be turned first, and then the motor should be idling for 6 hours, and the voltage potential should be within the designed range, so that the bearing temperature should be maintained at 40 °C up and down. During...