Recent Entries

• Adjustment Of The Calcium Carbonate Mill

  by gjsohcat Soly August 16, 2022
  If there is a large misalignment of the bolt holes, then reconstruction work must be carried out. Secondly, according to the corresponding standard requirements, the datum point and the corresponding center mark should be buried, both of which are the basic basis for the installation and adjustment ...

• Mini Cement Plant Continue Production

  by gjsohcat Soly August 9, 2022
  The sliding shaft of the mini cement plant is worn for a long time and reaches a certain thickness, the spherical body of the mini cement plant and the tile lining are difficult to combine, and scratches will occur. In general, this kind of situation is mostly because the temperature of the clinke...

• The Hollow Shaft Of Mini Cement Plant

  by gjsohcat Soly August 8, 2022
  The barrel screw and hollow shaft of the mini cement plant are broken. In the process of connecting the barrel and the hollow shaft of the mini cement plant, the barrel needs to have a through hole with the flange, and the pin is connected by a turnbuckle, and the through hole only needs to be con...

• The Power Of The Dolomite Powder Machine

  by gjsohcat Soly July 28, 2022
  When the dolomite powder machine is running empty, let the motor run for 2 hours under the condition of no load of the dolomite powder machine. During this period, ensure that the motor rotates in the correct direction and the accident button works normally and reliably to ensure safety. ...

• The Debugging Of Dolomite Powder Machine

  by gjsohcat Soly July 27, 2022
  The dolomite powder machine is an indispensable equipment in the concentrator, and it is also a very critical equipment in the construction of the entire concentrator. Therefore, it is very important to ensure the stable operation of the dolomite powder machine.  However, before it is o...